EM203 ENDURO MOVER HANDLER MANUAL APPROACH KIT + 80A AGM BATTERY + 3.5A BATTERY CHARGER + CASE

Complete Kit:

Mover
The maneuvering assistant allows you to move caravans,
trailers or horse trailers with precision and ease, thanks to its remote control.
No more help needed!
The maneuvers are carried out without problems to preserve your equipment (inside and outside the caravan).
Compact and lightweight, it is resistant to rain, dust, oil and grease, as well as UV rays.
Consisting of two powerful and silent 12 volt motors, the caravan mover drives the wheels by means of disengageable rollers
which adhere to the tires without damaging them (even when the wheels are wet).
Work on sloping terrain and in isolated or small spaces.
It can move forward, backward, turn in all directions and rotate up to 360° (except dual axis).
Requires a battery capable of providing at least 40A continuous and 130A peak.
This device fits most caravans, however, on some particular chassis versions
an adapter may be required.
Contact us before ordering!
Manual operation. Chain drive.

Characteristics:
Voltage: 12V.
Compatible Bluetooth module (Optional).
Kit consisting of 2 engine blocks and related wiring, a durable control box, an automatic switch and a remote control.
To be installed in specialized workshops.
For caravans weighing up to 1600 kg with single axle on flat terrain.
Capacity on 15% slopes: 1400 kg.
Speed: 11cm/s. Weight: 37kg.

Other characteristics

Model: EM203
attachment type: Manual
Number of axles: Single
Maximum capacity: 1400 kg
Maximum gradient: 15%

+

Drums
"AGM" type auxiliary battery specially adapted to the world of free time (captive liquid electrolyte).
"AGM" technology allows you to discharge up to 100% of the battery capacity to exploit the maximum available energy.
Waterproof and maintenance-free (very low self-discharge: 1 to 3% per year).
Protected against pressure variations and designed to avoid gas accumulation inside the battery.
Discharge limit voltage: 10.6 V. Discharge rate max. up to 100%. With adapters for attaching self-locking flaps and butterfly collar flaps. Effective capacity 83 Ah. Dimensions (WxHxD): 350 x 179 x 167 mm. Weight: 24kg.

Other characteristics

TECHNOLOGY: AGM
CAPACITY: 83Ah
END OF CHARGE VOLTAGE: 13.8V
NOMINAL VOLTAGE: 13.5V
SELF-DISCHARGE: <1 to 3%/year
RECOMMENDED UNLOADING SPEED: 80%
Maximum discharge current in PIC (3 sec.): 800A
MAXIMUM RECOMMENDED CHARGING CURRENT: 24A
OPERATING TEMPERATURE DURING THE DISCHARGE PHASE: -
OPERATING TEMPERATURE DURING CHARGING: -
COMMUNICATION METHODS: -
PARALLEL: MAX 4 UNITS
SERIES ASSEMBLY: MAX 4 UNITS
PERMITTED POSITION/FIXATION: STANDING / LYING
TYPE OF INSTALLATION: INTERNAL
HOUSES: PLASTIC
TERMINAL TYPE: M6
CIRCUIT BREAKER: NO
NUMBER OF CYCLES: From 400 to 600 cycles
PRODUCT DIMENSIONS IN MM (L x W x H): 350x167x199
NET WEIGHT: 22.5KG
SUPPLIED WITH: terminals + terminal covers + carrying handles
CERTIFICATIONS, APPROVALS: CE, environmental compatibility R10
EN STANDARD SIZE (L0-L1-L2-L3-L4-L5) : L5
WARRANTY: 2 YEARS
Power: 80Ah

+

An AC/DC charger recharges the auxiliary battery of your leisure vehicle.
Converts alternating current (from a 230V P17 socket) into direct current (12V).

With this portable charger, to always carry with you,
it can recharge its battery from any 230V socket without taking up too much space!

This AC/DC charger recharges its auxiliary battery in 8 steps:

Impulse
Gradual start
Constant current
Constant tension
Analyses
Complement
Floating load
Maintenance

Load current: 3.5A
Input Voltage: AC220V/50Hz
Output voltage: DC 6V/12V manual switching
AC cable length: 1.35m
DC cable length: 1m
Product dimensions (L x W x H): 118 x 71 x 80
Net weight: 0.6Kg
Safety: reverse connection, overheat protection, short circuit protection, overload protection.
It can identify non-rechargeable batteries
Compatible battery types: lead acid, gel batteries. AGM, Lithium, etc.
Battery type selection: automatic
Suitable for motorcycles, electric bikes, cars, etc.
Ideal for charging 6V / 12V lead acid automotive batteries, 12V AGM, 12V Lifepo4 with a capacity of up to 60Ah.
Accessories: manual + battery fixing cable + clamps + eyelet terminals
Natural cooling
Warranty: 24 months

+

Battery box
Made of polypropylene
For batteries max A-h 140
Internal dimensions 410x200xH250 mm
External dimensions 460x240xH280 mm